Repareer je spullen Gemeenschap Winkel

Joy-Con 버클 잠금 교체

Terug naar de handleiding
Engels
Koreaans
Vorige stap

Stap 8 vertalen

Stap 8
Joy-Con Buckle Lock Replacement, Remove the buckle lock: stap 0, afbeelding 1 van 3 Joy-Con Buckle Lock Replacement, Remove the buckle lock: stap 0, afbeelding 2 van 3 Joy-Con Buckle Lock Replacement, Remove the buckle lock: stap 0, afbeelding 3 van 3
Remove the buckle lock

  • Lift the buckle lock slightly out of its slot in the charging rail, just until the spring is exposed enough that you can grab it with tweezers.

  • Grab the buckle lock such that the tweezers are around both sides of the lock and holding the spring inside the lock.

  • When you pull the lock out, the spring can shoot out. Make sure you have a firm grip with the tweezers.

  • Pull the buckle lock out of its slot in the charging rail.

  • During reassembly, make sure to move the spring from the old lock to the new one.

버클 잠금 장치 분리하기

스프링을 핀셋으로 잡을 수 있을 만큼, 스프링이 충분히 보일 때까지 버클 잠금 장치를 충전 레일 슬롯에서 살짝 들어 올리세요.

스프링이 잠금 장치 내부에 있는 상태로 잠금 장치의 양 끝을 핀셋으로 잡으며 버클 잠금 장치를 잡으세요.

잠금 장치를 뺄 때 스프링이 튀어 나올 수 있습니다. 핀셋을 단단히 잡으세요..

충전 레일 슬롯에서 버클 잠금 장치를 당겨 빼세요.

재조립할 때, 스프링을 기존 잠금 장치에서 새 잠금 장치로 반드시 옮기세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.