Ga door naar hoofdinhoud
Engels
Nederlands
Stap 3
Use the flat end of a spudger to pry the thermal sensor bracket off the face of the hard drive.
  • Use the flat end of a spudger to pry the thermal sensor bracket off the face of the hard drive.

  • If you're replacing your hard drive, transfer this bracket and the thermal sensor to your new hard drive. If the adhesive refuses to stick during reinstallation, apply double-stick tape to the underside of the two flat ears of the thermal sensor bracket.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.