Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.
Inleiding
Is your Roomba banging its head against the wall? Follow this guide to replace the bumper sensor.
Wat je nodig hebt
-
-
-
With a Phillips #1 screwdriver, remove the ten 12mm screws located along the bottom of the bumper.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
4 andere personen hebben deze handleiding voltooid.