Inleiding

This guide will illustrate how to use your snazzy new iPhone 5 Liberation Kit to replace your iPhone 5's original Pentalobe screws with good ol' regular Phillips screws.

Phillips drivers are much more readily available, and the screws are less likely to strip, making all of your future repairs and modifications much easier and more accessible.

Gereedschap

Geen gereedschap nodig.

Before we proceed, let's make sure you have the correct tools for the job.
  • Before we proceed, let's make sure you have the correct tools for the job.

  • iFixit's iPhone 5 Liberation Kit includes:

    • One 5-Point Pentalobe screwdriver

    • One #000 Phillips screwdriver

    • Two 3.6 mm "Liberation" Phillips screws

  • Are you ready to break the shackles of hardware oppression and liberate your iPhone? Let's rock!

Voeg opmerking toe

Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.
  • Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.

Voeg opmerking toe

  • Peel and remove the two 3.6 mm Phillips screws from the iPhone Liberation Card.

  • Be careful! Both the Phillips and Pentalobe screws are really small. How small? See for yourself, and be careful not to drop them!

Voeg opmerking toe

  • Insert the two 3.6 mm Phillips screws into the screw holes using the provided #000 Phillips screwdriver.

  • Huzzah! Your iPhone is now liberated from those pesky "Pentalobular" screws.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

61 andere personen hebben deze handleiding voltooid.

Andrew Optimus Goldberg

Lid sinds: 17-10-09

383.966 Reputatie

412 handleidingen geschreven

Team

iFixit Lid van iFixit

Community

107 Leden

6.499 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 6

Afgelopen 7 Dagen: 40

Afgelopen 30 Dagen: 184

Altijd: 30,290