Ga door naar hoofdinhoud

Inleiding

prerequisite guide, hard drive removal

Onderdelen

Geen onderdelen opgegeven.

  1. Pull straight up on the SATA data/power cable to disconnect it from the drive. Pull straight up on the SATA data/power cable to disconnect it from the drive.
    • Pull straight up on the SATA data/power cable to disconnect it from the drive.

  2. Remove two 7.3 mm T10 screws securing the left hard drive bracket to the rear case.
    • Remove two 7.3 mm T10 screws securing the left hard drive bracket to the rear case.

  3. MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now

    MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now
  4. Grab the hard drive and left hard drive bracket together. Tilt the left side up away from the rear case, and slide the assembly to the left. Remove the hard drive and left hard drive bracket from the iMac.
    • Grab the hard drive and left hard drive bracket together.

    • Tilt the left side up away from the rear case, and slide the assembly to the left.

    • Remove the hard drive and left hard drive bracket from the iMac.

  5. Remove the left hard drive bracket. Remove the left hard drive bracket.
    • Remove the left hard drive bracket.

Conclusie

To reassemble your device, follow these instructions in reverse and use our Adhesive Strips Guide to reattach the display glass.

Andrew Optimus Goldheart

Lid sinds: 17-10-09

417.291 Reputatie

411 handleidingen geschreven

Team

iFixit Lid van iFixit

Community

98 Leden

8.935 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 3

Altijd: 324