Inleiding

Upgrade your RAM for an instant increase in speed.

Loosen the three Phillips screws securing the access door to the bottom edge of your iMac. These screws will remain captive in the access door.
  • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

  • These screws will remain captive in the access door.

  • Remove the access door from your iMac.

  • During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.

In order for the logic board to come out cleanly, one should remove the RAM at the end of this step.

kevmacmills - Antwoord

Definitely! The author should make this as a step in the description (because not everyone reads Comments)

finnik2d - Antwoord

Just did this procedure and the RAM must absolutely come out for the logic board to come free later.

matt - Antwoord

Mac RAM Kits
Versnel je Mac. Breid zijn geheugen uit.
Mac RAM Kits
Haal meer megabytes uit je Mac.
Use the sharp tip of a spudger to pull the black plastic RAM tabs out of the memory bay.
  • Use the sharp tip of a spudger to pull the black plastic RAM tabs out of the memory bay.

Voeg opmerking toe

Pull the black plastic RAM tab away from your iMac to eject the RAM chip. Grab the RAM chip by its edges and pull it straight out of its slot.
  • Pull the black plastic RAM tab away from your iMac to eject the RAM chip.

  • Grab the RAM chip by its edges and pull it straight out of its slot.

  • If two RAM chips are installed, repeat this process for the other chip.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

95 andere personen hebben deze handleiding voltooid.

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 9

Afgelopen 7 Dagen: 61

Afgelopen 30 Dagen: 290

Altijd: 69,623