Ga door naar hoofdinhoud

iMac Intel 24" EMC 2134 and 2211 Display Panel Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 5
iMac Intel 24" EMC 2134 and 2211 Display Panel Replacement: stap 0, afbeelding 1 van 2 iMac Intel 24" EMC 2134 and 2211 Display Panel Replacement: stap 0, afbeelding 2 van 2
  • With the LCD lifted, disconnect the LCD cable by pulling down.

  • The LCD cable is attached to the underside of the power supply; be careful where you put your fingers so you don't get zapped by a capacitor.

  • On reassembly, you may find it helpful to remove the power supply, reconnect the LCD power cable, and then reinstall the power supply.

  • Alternatively, the LCD power cable can be disconnected from the LCD, rather than the power supply.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.