Ga door naar hoofdinhoud

Fujifilm FinePix T500 Shutter and Power Button Circuit Board Replacement

Engels
Nederlands

Stap 1 vertalen

Stap 1
Fujifilm FinePix T500 Shutter and Power Button Circuit Board Replacement: stap 0, afbeelding 1 van 1
  • Desolder the red, black, and white wires from the circuit board that you pried off earlier.

  • You will have to solder these wires in the same locations on your replacement circuit board. Removing the motherboard makes accessing the wires easier and eliminates the risk of the motherboard being damaged from a soldering accident.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.