Ga door naar hoofdinhoud

DualSense Controller V2 Stick Drift Fix

Engels
Nederlands
Stap 10
DualSense Controller V2 Stick Drift Fix: stap 0, afbeelding 1 van 2 DualSense Controller V2 Stick Drift Fix: stap 0, afbeelding 2 van 2
  • Use a Phillips screwdriver to remove the two 6.4 mm screws behind the L1 and R1 buttons, as well as the two 6.4 mm screws that secure the bottom corners of the lower case.

  • You will have a total of four 6.4 mm Phillips screws. Make sure not to lose any of them.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.