Nintendo Switch OLED Model Screen OLED Assembly Replacement

Terug naar de handleiding

Engels

Nederlands

Vorige stap Volgende stap

Stap 9 vertalen

Stap 9

Nintendo Switch OLED Model Screen OLED Assembly Replacement, Remove the battery: stap 0, afbeelding 1 van 3

Nintendo Switch OLED Model Screen OLED Assembly Replacement, Remove the battery: stap 0, afbeelding 2 van 3

Nintendo Switch OLED Model Screen OLED Assembly Replacement, Remove the battery: stap 0, afbeelding 3 van 3

Remove the battery

Pry up with the plastic card to completely separate the battery's adhesive.
Remove the battery.
Use adhesive remover or isopropyl alcohol and a microfiber cloth to clean up any remaining adhesive left behind in the battery well before you install the new battery.
If your new battery does not come with pre-installed adhesive, follow this guide to install pre-cut adhesive on the bottom of the battery.
Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.