Wijzigingen aan stap #3
Bewerken voor Jeff Suovanen —
Bewerking goedgekeurd door Jeff Suovanen
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] Use a plastic opening tool to gently detach the battery connector from the socket on the logic board. Start lifting off the connector from the bottom side, by placing the tip of the tool between the loudspeaker enclosure and the metal cover of the connector. |
|---|---|
| + | [* black] Use a plastic opening tool to gently pry up the battery connector from its socket on the logic board. |
| + | [* black] Place the tip of the tool between the loudspeaker enclosure and the metal cover of the connector, and lift the bottom edge of the connector first. |
| [* icon_note] The battery connector comes off vertically from the logic board. Do not apply force sideways. | |
| - | [* icon_caution] Be careful not to |
| + | [* icon_caution] Be careful not to pry at the battery connector socket itself, or it may detach from the logic board. There are four very small solder points awaiting this mistake! |