Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerken voor Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

-[* black] To pry off the cover, carefully lift it up and away from the hinges (in order to clear the headphone port), then pivot it towards the hinges to expose the circuit boards.
-[* black] ''Note:''' There is still a ribbon cable attaching the cover to the motherboard, so do not attempt to pull the cover completely off at this step.
+[* black] To separate the cover, carefully lift it up and away from the hinges (in order to clear the headphone port), then pivot it towards the hinges to expose the circuit boards.
+ [* icon_caution] Don't fully remove the cover yet, or you may damage the delicate ribbon cable that still connects it to the motherboard.