iPhone 6 Power Button Cable Assembly Replacement stap #2 geschiedenis

Wijzigingen aan stap #2

Bewerken voor Geoff Wacker — 19 nov. 2014

Bewerking goedgekeurd door Geoff Wacker

	[* black] Gently pull the battery adhesive tab away from the battery, toward the bottom of the iPhone.
	[* black] Try not to pull against the battery or the lower components, or you may rip the adhesive strip.
	[* black] Continue pulling, allowing the strip to slowly slip out from between the battery and the rear case. When you feel increased resistance from the strip, stop pulling and continue with the next step.
	[* icon_note] If the battery adhesive tabs break off at any point during the removal process, use your fingers or blunt tweezers to retrieve the remaining length of adhesive, and continue pulling.
-	[* icon_caution] If one of the adhesive strips breaks under the battery during this procedure, and cannot be retrieved, remove the remaining strip, and then proceed to *Step 42*.
+	[* icon_caution] If one of the adhesive strips breaks under the battery during this procedure, and cannot be retrieved, remove the remaining strip, and then proceed to *Step 44*.