Repareer je spullen Gemeenschap Winkel

Wijzigingen aan stap #6

Bewerken voor Jeff Suovanen —

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

-[* red] On the bottom-left side of the phone is a little board that goes with this dual-ribbon board contraption. Be sure you give the board a little push with your plastic prying tool it'll eventually loosen.
-[* black] Gently lift the board from the top with the power button/volume assembly in your fingers, now pry the bottom part of the board free of the phone housing.
-[* black] The cables on the bottom can get caught on the bottom board, just be gentle as you lift it out of the phone.
-[* icon_note] In picture 3 there is a red box around a little plastic piece that comes with this assembly. Remember this tucks UNDER the board once you're putting it back in.
+[* red] On the bottom-left side of the phone is a little board that goes with this dual-ribbon board contraption. Be sure you give the board a little push with your plastic prying tool—it'll eventually loosen.
+[* black] Gently lift the board from the top with the power button/volume assembly in your fingers, and pry the bottom part of the board free of the phone housing.
+[* icon_note] The cables on the bottom can get caught on the bottom board—just be gentle as you lift it out of the phone.
+[* icon_reminder] In picture 3 there is a red box around a little plastic piece that comes with this assembly. Remember this tucks UNDER the board once you're putting it back in.