DJI Phantom 2 Vision Outer Shell Replacement stap #2 geschiedenis

Wijzigingen aan stap #2

Bewerken voor Jacob Cordeiro — 28 feb. 2025

Bewerking goedgekeurd door Jacob Cordeiro

-	[* black] The final screws ~~should be~~ located around the base of the 4 unscrewed on each arm in step 1.
-	[* black] Unscrew each of the 12 screws. There are 2 (9mm) Allen head screws on each arm. Remove using* #2* Allen head bit. ~~Final~~ screw is located at end ~~off~~ arm. Remove using *00* Philips head bit.
+	[* black] The final screws are located around the base of the four unscrewed sections on each arm from step 1.
+	[* black] Unscrew each of the 12 screws. There are two (9mm) *Allen* head screws on each arm. Remove them using* #2* *Allen* head bit. The final screw is located at end of each arm. Remove it using *00* *Philips* head bit.