Repareer je spullen Gemeenschap Winkel

Wijzigingen aan stap #4

Bewerken voor Sarah Westberg —

Bewerking goedgekeurd door Sarah Westberg

Voor
Na
Ongewijzigd

Stap regels

-[* black] Dislodge the stylus in the middle of the left edge and pull it out.
-[* red] Unscrew the 10 remaining 2mm Phillips #00 screws using the Phillips #00 screwdriver.
-[* icon_caution] Unlike the rear panel, these screws do detach from the remaining panel, so please do not lose the small screws.
+[* black] Pull the stylus out from the middle of the left edge of the device.
+[* red] Use a Phillips #00 screwdriver to remove ten 2.0 mm screws from the back panel.
+[* icon_note] Unlike the top rear panel, these screws come out, so be sure to keep them in a safe place.