Nintendo Switch Lite Teardown stap #4 geschiedenis

Wijzigingen aan stap #4

Bewerken voor Jeff Suovanen — 23 sep. 2019

Bewerking goedgekeurd door Jeff Suovanen

	[* black] The way is blocked by impassable (tri-point) screws. We can't progress further until we find and acquire the special tool.
	[* black] No distracting side quests today—we're on a mission and we brought all the tools needed to beat the game. Y00 driver, we choose you!
-	[* black] The back cover uses tri-point and Phillips screws—same as the original Switch, though the screws are in different spots
+	[* black] Under the back cover, we find: another cover. Moving on.
+	[* black] We note here that the SD card reader is now permanently attached to the main board—whereas on the old Switch, we had already removed it by this point.
+	[* black] Modularity is generally good for repair, so this is minor step backwards from our point of view.
+	[* black] Let's peek under the metal shield and get our first look at the internals in the visible light spectrum.