Wijzigingen aan stap #18
Bewerken voor Eric —
Bewerking goedgekeurd door Jeff Suovanen
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] Slide the opening pick along the top edge of the iPad, pulling it out slightly to go around the front-facing camera bracket. | |
| [* black] The adhesive along this section is very thick, and a fair amount of force may be required. Work carefully and slowly, making sure to not slip and damage yourself or your iPad. | |
| [* icon_note] If the adhesive has cooled too much, replace the iOpener along the top edge and continue working. If the iOpener has cooled too much, reheat it. | |
| - | [* icon_reminder] If the opening pick is getting stuck in the adhesive, "roll" the pick as shown in [guide|10808|step |
| + | [* icon_reminder] If the opening pick is getting stuck in the adhesive, "roll" the pick as shown in [guide|10808|step 9|stepid=38829]. |