Wijzigingen aan stap #15
Bewerken voor Jeff Suovanen —
Bewerking goedgekeurd door Jeff Suovanen
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] Continue releasing the adhesive along the bottom of the iPad, pulling the opening pick out far enough to go around the home button, and re-inserting it once the pick is past the home button. |
|---|---|
| + | [* black] Continue releasing the adhesive along the bottom of the iPad, pulling the opening pick out far enough to go around the home button, and re-inserting it to a depth of 1/2 inch once the pick is past the home button. |
| [* icon_note] If the adhesive has cooled too much along the bottom edge, reheat the iOpener to warm the adhesive where you are working. | |
| [* icon_caution] Do not heat the iOpener more than a minute at a time, and always allow at least two minutes before reheating it. |