Inleiding

This is a guide to replacing the Back Cover on the Zune Flash 2nd Generation.

Onderdelen

Geen onderdelen nodig.

Prior to disassembly, verify the hold switch is engaged to ensure the device will not turn on during the procedure. If the device turns on while it is being disassembled it could cause irreversible damage to the device.
  • Prior to disassembly, verify the hold switch is engaged to ensure the device will not turn on during the procedure.

  • If the device turns on while it is being disassembled it could cause irreversible damage to the device.

  • PICS MAKE NO SENSE.

Voeg opmerking toe

Remove the top metal clip by inserting a Zune opening tool in between the faceplate and back cover and pulling gently back as shown in the images. You should hear a 'click' as the clip detaches from the device.
  • Remove the top metal clip by inserting a Zune opening tool in between the faceplate and back cover and pulling gently back as shown in the images.

  • You should hear a 'click' as the clip detaches from the device.

Voeg opmerking toe

Remove the two screws shown using a small Tri-Wing screwdriver.
  • Remove the two screws shown using a small Tri-Wing screwdriver.

  • You will need to use a very small Tri-Wing screwdriver to ensure that you do not strip the screws.

Voeg opmerking toe

Insert the Zune opening tool between the faceplate and the back cover, starting from the top and slowly work your way around the device. Insert the Zune opening tool between the faceplate and the back cover, starting from the top and slowly work your way around the device. Insert the Zune opening tool between the faceplate and the back cover, starting from the top and slowly work your way around the device.
  • Insert the Zune opening tool between the faceplate and the back cover, starting from the top and slowly work your way around the device.

Voeg opmerking toe

Work your way around the Zune until the back cover comes free. Remove the back plate and set it aside. Work your way around the Zune until the back cover comes free. Remove the back plate and set it aside. Work your way around the Zune until the back cover comes free. Remove the back plate and set it aside.
  • Work your way around the Zune until the back cover comes free. Remove the back plate and set it aside.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

ybahman

Lid sinds: 01-11-09

118 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 9-20, Regan Fall 2009 Lid van Cal Poly, Team 9-20, Regan Fall 2009

CPSU-REGAN-F09S9G20

5 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 5

Altijd: 3,214