Ga door naar hoofdinhoud

Waring Pro SB30 Back Panel Replacement

Wat je nodig hebt

  1. Waring Pro SB30 Back Panel Replacement, Back Panel: stap 1, afbeelding 1 van 1
    • Remove the screws on the back panel with the #1 Phillips screwdriver bit.

    • The screws in the rubber legs of the burner do not need to be removed.

    • If the back panel has never been opened before, the screws may be more difficult to unscrew.

  2. Waring Pro SB30 Back Panel Replacement: stap 2, afbeelding 1 van 2 Waring Pro SB30 Back Panel Replacement: stap 2, afbeelding 2 van 2
    • Using a wrench, remove the bolt from the center of the back panel.

  3. Waring Pro SB30 Back Panel Replacement: stap 3, afbeelding 1 van 1
    • The back panel can now be easily lifted off.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Sun Fai Lau

Lid sinds: 09/22/14

588 Reputatie

5 handleidingen geschreven

Team

USF Tampa, Team 10-7, Brown Fall 2014 Lid van USF Tampa, Team 10-7, Brown Fall 2014

USFT-BROWN-F14S10G7

3 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 5

Altijd: 284