Ga door naar hoofdinhoud

Vizio SmartCast Crave 360 Speaker Ring Replacement

Wat je nodig hebt

  1. Vizio SmartCast Crave 360 Speaker Ring Replacement, Speaker Ring: stap 1, afbeelding 1 van 1
    • Place the speaker so that the speaker volume ring faces up.

  2. Vizio SmartCast Crave 360 Speaker Ring Replacement: stap 2, afbeelding 1 van 2 Vizio SmartCast Crave 360 Speaker Ring Replacement: stap 2, afbeelding 2 van 2
    • Using the halberd spudger, pop off the metal disc that is connected to the speaker ring.

    • Remove the metal disc.

    • Ignore the small circuit board that is under the metal disc. It is not important for this replacement.

  3. Vizio SmartCast Crave 360 Speaker Ring Replacement: stap 3, afbeelding 1 van 1
    • Remove the four 5mm screws that connect the inner bearing to the outer ring using a Phillips #000 screwdriver.

  4. Vizio SmartCast Crave 360 Speaker Ring Replacement: stap 4, afbeelding 1 van 2 Vizio SmartCast Crave 360 Speaker Ring Replacement: stap 4, afbeelding 2 van 2
    • Take the outer ring and inner bearing off of the speaker.

    • Remove the outer ring from the inner bearing and plastic disc.

  5. Vizio SmartCast Crave 360 Speaker Ring Replacement: stap 5, afbeelding 1 van 1
    • Remove the inner bearing from the plastic disc so that all three components of the speaker ring are separated.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Pavani Lopez Leon

Lid sinds: 09/06/22

427 Reputatie

3 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 10

Altijd: 240