Inleiding
This guide will show you the steps to replacing the battery. Soldering and de-soldering will be necessary.
Wat je nodig hebt
-
-
Unscrew the two 4.0mm Phillips head screws found near the ports at the bottom of the device using a PH #00 screwdriver.
-
-
-
-
Pry a thin tool under the battery.
-
Slide the tool around all sides of the battery. Separate it evenly on all sides for the best result.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
3 andere personen hebben deze handleiding voltooid.