Inleiding
Follow these instructions to disassemble an upright vacuum cleaner and remove debris like hair or string that may be preventing the floor brush from spinning.
*Exact part locations and the number of screws may vary according to the device model.
Wat je nodig hebt
-
-
-
Be sure to unplug the device from the wall outlet before disassembling.
-
Remove the bottom head of the vacuum cleaner by pressing the push button.
Vraag FixBot
-
-
-
Separate the top portion of the head from the bottom.
-
Make sure not to pull off or damage the connected wires.
-
-
-
-
Use scissors to cut strings and other debris from the brush roll. Avoid cutting the bristles.
-
-
-
Return the clean brush roll and re-situate the belt to secure it in place.
-
-
To reassemble your device, follow the disassembly instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
Één andere persoon heeft deze handleiding voltooid.
Team
Oakland University, Team 6-12, Walwema Winter 2016 Lid van Oakland University, Team 6-12, Walwema Winter 2016
OAK-WALWEMA-W16S6G12
1 Lid
3 handleidingen geschreven
