Repareer je spullen Gemeenschap Winkel

Turtle Beach Ear Force XO Four Speaker Cone Replacement

Inleiding

If one of your Turtle Beach Ear Force XO Four speakers stops working, it may need to be replaced. To do so, follow this guide.

Wat je nodig hebt

  1. Turtle Beach Ear Force XO Four Speaker Cone Replacement, Ear Cushion: stap 1, afbeelding 1 van 1
    Gereedschap gebruikt in deze stap:
    Jimmy
    $7.95
    Koop

    • Insert a flat metal object (such as iFixit's Jimmy tool) between the green and black plastic portions of the headset.

    • When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.

    Bewerken

  2. Turtle Beach Ear Force XO Four Speaker Cone Replacement: stap 2, afbeelding 1 van 2 Turtle Beach Ear Force XO Four Speaker Cone Replacement: stap 2, afbeelding 2 van 2

    • Carefully pry the plastic pieces apart, working your way around the ear cushion.

    • Be sure not to break the tabs on the back side of the ear pad!

    Bewerken

  4. Turtle Beach Ear Force XO Four Speaker Cone Replacement: stap 3, afbeelding 1 van 3 Turtle Beach Ear Force XO Four Speaker Cone Replacement: stap 3, afbeelding 2 van 3 Turtle Beach Ear Force XO Four Speaker Cone Replacement: stap 3, afbeelding 3 van 3

    • Pull the loosened ear pad apart from the rest of the speaker.

    • Pushing the pad and the speaker back together is the only step required for ear pad reassembly.

    Bewerken

  5. Turtle Beach Ear Force XO Four Speaker Cone Replacement, Speaker Cone: stap 4, afbeelding 1 van 2 Turtle Beach Ear Force XO Four Speaker Cone Replacement, Speaker Cone: stap 4, afbeelding 2 van 2

    • Remove four 7.3mm PH0 screws.

    • As these screws are very small, it may be best to keep them in a plastic bag or other container.

    Bewerken

  6. Turtle Beach Ear Force XO Four Speaker Cone Replacement: stap 5, afbeelding 1 van 2 Turtle Beach Ear Force XO Four Speaker Cone Replacement: stap 5, afbeelding 2 van 2

    • Lift speaker cone off of the back casing.

    • Be gentle; the small wires connecting the speaker cone to the rest of the device may break if you pull too hard.

    • Follow iFixit's soldering guide to remove the wires connected to the speaker.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

9 andere personen hebben deze handleiding voltooid.

Auteur

met 3 andere bijdragers

Evalyn Johnson

Lid sinds: 09/22/15

228 Reputatie

2 handleidingen geschreven

Medailles: 12

+9 andere badges

Team

Baylor, Team 10-14, Williams Fall 2015 Lid van Baylor, Team 10-14, Williams Fall 2015

BU-WILLIAMS-F15S10G14

3 Leden

8 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 4

Altijd: 9,382