Inleiding
If the battery on your Trio Stealth-10 is no longer functioning, replacement isn't difficult and this guide will give you the step by step procedure to do so.
Wat je nodig hebt
-
-
To remove the back panel, you will need to use a plastic opening tool and slowly separate the back panel from the device.
-
-
-
Gereedschap gebruikt in deze stap:Tweezers$4.99
-
Disconnect the screen/digitizer connection. Use tweezers and pull each grey end of the connection until there is a small gap between the grey and white on the connector to the motherboard. The connection should be easily removable.
-
Pull the cable away and clear from under the battery to avoid damage to the connection.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
6 andere personen hebben deze handleiding voltooid.