Repareer je spullen Gemeenschap Winkel

SteelSeries Arctis Pro Plus GameDAC 3.5mm Headphone Jack Replacement

Inleiding

If the headphone jack is damaged or the headset is not longer outputting sound, you might need to replace the 3.5mm audio jack. Follow this guide to safely access and remove the audio jack.

Wat je nodig hebt

  1. SteelSeries Arctis Pro Plus GameDAC 3.5mm Headphone Jack Replacement, 3.5mm Headphone Jack: stap 1, afbeelding 1 van 2 SteelSeries Arctis Pro Plus GameDAC 3.5mm Headphone Jack Replacement, 3.5mm Headphone Jack: stap 1, afbeelding 2 van 2

    • Lift the edge of the cushion and slightly pull out.

    • Work your way around the cushion until it comes off.

    • Repeat for the other cushion.

    Bewerken

  2. SteelSeries Arctis Pro Plus GameDAC 3.5mm Headphone Jack Replacement: stap 2, afbeelding 1 van 1

    • Remove the three 5mm screws with a Phillips #0 driver head on the headphone with the microphone.

    Bewerken

  4. SteelSeries Arctis Pro Plus GameDAC 3.5mm Headphone Jack Replacement: stap 3, afbeelding 1 van 1

    • Lift the speaker off the headset to expose the circuit board.

    • Be careful not to lift the speaker too quickly or too forcefully to prevent the wires from being pulled out of their connections.

    Bewerken

  5. SteelSeries Arctis Pro Plus GameDAC 3.5mm Headphone Jack Replacement: stap 4, afbeelding 1 van 1

    • Remove the three 5mm screws using a Phillips #0 driver head.

    Bewerken

  6. SteelSeries Arctis Pro Plus GameDAC 3.5mm Headphone Jack Replacement: stap 5, afbeelding 1 van 1

    • Lift the circuit board out of the plastic housing.

    • Press in on the volume wheel while pulling on the circuit board to help maneuver the circuit board out of the housing.

    Bewerken

  7. SteelSeries Arctis Pro Plus GameDAC 3.5mm Headphone Jack Replacement: stap 6, afbeelding 1 van 2 SteelSeries Arctis Pro Plus GameDAC 3.5mm Headphone Jack Replacement: stap 6, afbeelding 2 van 2

    • Desolder the three connecting audio jack leads from the circuit board.

    • For help desoldering connections, follow this useful guide on Hoe moet je (de-)solderen?.

    • Use caution when soldering. The heated tip may cause damage to the board or burn you.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

5 andere personen hebben deze handleiding voltooid.

Auteur

met 4 andere bijdragers

Juan Gonzalez

Lid sinds: 01/24/19

422 Reputatie

2 handleidingen geschreven

Medailles: 7

+4 andere badges

Team

Cal Poly, Team S18-G1, White Winter 2019 Lid van Cal Poly, Team S18-G1, White Winter 2019

CPSU-WHITE-W19S18G1

4 Leden

21 handleidingen geschreven

Één opmerking

hey @juangonzal87030 I am unable to take out circuit board out of my Arctic Wireless Pro even even when all the screws are taken out. I am unable to understand what am I missing over here. Can you help

Ashutosh Kumar Singh - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 13

Afgelopen 30 dagen: 64

Altijd: 8,659