Ga door naar hoofdinhoud
Word lid van de reparatiegemeenschap - Account aanmaken

Sony PS-LX300USB Needle Replacement

Wat je nodig hebt

  1. Sony PS-LX300USB  Needle Replacement, Needle: stap 1, afbeelding 1 van 3 Sony PS-LX300USB  Needle Replacement, Needle: stap 1, afbeelding 2 van 3 Sony PS-LX300USB  Needle Replacement, Needle: stap 1, afbeelding 3 van 3
    • Flip the needle cover down.

    • Grasp the needle cartridge between two fingers.

    • Pull the cartridge down and towards you to remove it.

  2. Sony PS-LX300USB  Needle Replacement: stap 2, afbeelding 1 van 3 Sony PS-LX300USB  Needle Replacement: stap 2, afbeelding 2 van 3 Sony PS-LX300USB  Needle Replacement: stap 2, afbeelding 3 van 3
    • Angle the cartridge diagonally inside the tone arm.

    • Push up and into the tone arm until you hear a click.

Eindstreep

7 andere personen hebben deze handleiding voltooid.

Christopher Slaughter

Lid sinds: 09/27/17

401 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team S8-G3, Banghart Fall 2017 Lid van Cal Poly, Team S8-G3, Banghart Fall 2017

CPSU-BANGHART-F17S8G3

5 Leden

5 handleidingen geschreven

5Gids Commentaar

do you ship to philippines please email me jabez091715@gmail.com

willmermejarito - Antwoord Deel

Hei, i need a needle , can you send it to my country Bulgaria. Please e-mail me if you have it, anatolt@yahoo.com Thank you. A

anatolt - Antwoord Deel

So, my needle wore down from the arm having bumped off the rest and who even knows how long the table was turning! My question is, is it possible to add a tone arm lock? I swore mine had one but, apparently, it does not. I have a Sony ps-lx300usb. It’s so odd, cuz there’s nothing that suggests anything broke off but I distinctly remember a lock! Any guidance would be great!

Cathy johnson - Antwoord Deel

Did you order a needle from the link on this website? Were you satisfied? I am in the same boat you are. In future I won't be leaving the turntable without an lp on it.

C Audley - Deel

I tried removing the needle and have pulled the metal part out with it, now it doesn't play correctly. Any idea how to source the complete arm / needle unit?

Alex Grover - Antwoord Deel

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 7

Afgelopen 7 dagen: 40

Afgelopen 30 dagen: 199

Altijd: 33,384