Inleiding

Replacing the lens mount requires removing any lens that is already attached then simply removing the casing of the lens mount.

Onderdelen

Geen onderdelen nodig.

Hold lens and camera securely with two hands. With the hand holding the camera, push down on the lens button. Twist the lens counterclockwise and pull out to release lens.
  • Hold lens and camera securely with two hands.

  • With the hand holding the camera, push down on the lens button. Twist the lens counterclockwise and pull out to release lens.

Voeg opmerking toe

Using your screwdriver, remove the four (3.5 mm) Phillips screws on the front face of the lens mount.
  • Using your screwdriver, remove the four (3.5 mm) Phillips screws on the front face of the lens mount.

  • Make sure to keep track of these screws and not misplace them.

Voeg opmerking toe

Remove the silver plate by gently pinching with your fingers.
  • Remove the silver plate by gently pinching with your fingers.

Voeg opmerking toe

Now the black plate should be exposed. You can remove this again by gently pinching with your fingers and lifting up.
  • Now the black plate should be exposed. You can remove this again by gently pinching with your fingers and lifting up.

Voeg opmerking toe

Using the tweezers, grab the thin silver ring and lift up.
  • Using the tweezers, grab the thin silver ring and lift up.

Voeg opmerking toe

The camera mount should now be barren and look like this.
  • The camera mount should now be barren and look like this.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Emily Trujillo

Lid sinds: 08-04-14

1.060 reputatie

6 handleidingen geschreven

Team

Cal Poly, Team 8-9, Regan Spring 2014 Lid van Cal Poly, Team 8-9, Regan Spring 2014

CPSU-REGAN-S14S8G9

4 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 20

Altijd: 1,740