Repareer je spullen Gemeenschap Winkel

Sony DSC-RX100MA Screen Replacement

Inleiding

If your camera's screen isn't working properly, you may need to replace it. Follow this guide to do so!

Wat je nodig hebt

  1. Sony DSC-RX100MA Screen Replacement, Back Cover: stap 1, afbeelding 1 van 3 Sony DSC-RX100MA Screen Replacement, Back Cover: stap 1, afbeelding 2 van 3 Sony DSC-RX100MA Screen Replacement, Back Cover: stap 1, afbeelding 3 van 3

    • Remove battery by sliding the tab to open the cover

    Bewerken

  2. Sony DSC-RX100MA Screen Replacement: stap 2, afbeelding 1 van 3 Sony DSC-RX100MA Screen Replacement: stap 2, afbeelding 2 van 3 Sony DSC-RX100MA Screen Replacement: stap 2, afbeelding 3 van 3

    • Using the screwdriver, remove all screws (black 2.5mm) from outermost layer of the assembly.

    • All screws in the camera can be removed with the PH 0 driver head.

    Bewerken

  3. Sony DSC-RX100MA Screen Replacement: stap 3, afbeelding 1 van 3 Sony DSC-RX100MA Screen Replacement: stap 3, afbeelding 2 van 3 Sony DSC-RX100MA Screen Replacement: stap 3, afbeelding 3 van 3

    • Also using the screwdriver, remove screws (black 1mm) underneath articulated LCD screen.

    • Remove the marked 2.5 mm screws with the screwdriver

    Bewerken

  5. Sony DSC-RX100MA Screen Replacement: stap 4, afbeelding 1 van 2 Sony DSC-RX100MA Screen Replacement: stap 4, afbeelding 2 van 2

    • Using the plastic opening tools, carefully pry off the bottom plate.

    • Do not pull too hard as you may break the plastic casing.

    Bewerken

  6. Sony DSC-RX100MA Screen Replacement: stap 5, afbeelding 1 van 3 Sony DSC-RX100MA Screen Replacement: stap 5, afbeelding 2 van 3 Sony DSC-RX100MA Screen Replacement: stap 5, afbeelding 3 van 3

    • Using the same plastic opening tools, separate the screen and back assembly from the front portion of the camera

    • Once the back assembly is slightly detached, pull the media covers for the HDMI and Multimedia ports

    Bewerken

  7. Sony DSC-RX100MA Screen Replacement: stap 6, afbeelding 1 van 2 Sony DSC-RX100MA Screen Replacement: stap 6, afbeelding 2 van 2

    • Remove the back cover

    Bewerken

  8. Sony DSC-RX100MA Screen Replacement, Screen: stap 7, afbeelding 1 van 3 Sony DSC-RX100MA Screen Replacement, Screen: stap 7, afbeelding 2 van 3 Sony DSC-RX100MA Screen Replacement, Screen: stap 7, afbeelding 3 van 3

    • Move side panel to get access to screws

    • Remove two screws (black 2.5mm) with PH #0 screwdriver

    Bewerken

  9. Sony DSC-RX100MA Screen Replacement: stap 8, afbeelding 1 van 2 Sony DSC-RX100MA Screen Replacement: stap 8, afbeelding 2 van 2

    • Remove back panel assembly while still keeping ribbon cable attached

    • Be very gentle and care not to tear the gold ribbon cable. This will be a common theme throughout these replacement guides.

    Bewerken

  10. Sony DSC-RX100MA Screen Replacement: stap 9, afbeelding 1 van 2 Sony DSC-RX100MA Screen Replacement: stap 9, afbeelding 2 van 2

    • Carefully unplug ribbon connector to fully detach LCD screen assembly from camera

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Auteur

met 4 andere bijdragers

KC Egger

Lid sinds: 02/10/17

291 Reputatie

2 handleidingen geschreven

Medailles: 8

+5 andere badges

Team

Cal Poly, Team 21-1, Maness Winter 2017 Lid van Cal Poly, Team 21-1, Maness Winter 2017

CPSU-MANESS-W17S21G1

5 Leden

10 handleidingen geschreven

4 opmerkingen

Any idea where I can get a set or replacement screws? one came out of my LCD joint and I can’t find replacements anywhere online. I’ve even tried Ebay.

Alberto Lora - Antwoord

Definately be careful with the gold ribbon cable, looked at mine funny and it just snapped in two.. waiting on a replacement now :(

Connor Quinn - Antwoord

I’ve ripped 2 of these before - not fun! Still… cheap enough to buy but delivery took a couple of weeks.

I had a cracked screen so had to take this out to replace as well - problem i’ve had is that although i stuck it down really well (with 3M 1mm double-sided tape, it doesn’t hold great and so the screen has risen a bit and doesn’t sit flush.

Just in the process now of sticking it down again but with a touch of superglue as i need it to hold down a bit better - that should hopefully be me done then :)

Great guide by the way KC Egger - thanks for taking the time to put this together - it’s been a life saver for me!

Jamie Dunkley - Antwoord

Where did you purchase your screen, I’ve been trying to find one from Sony parts dealers and can’t find it. Any links would be helpful, thanks.

Ian Cullen -

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 10

Afgelopen 30 dagen: 50

Altijd: 4,448