Inleiding
This repair guide will walk through the primary steps of replacing the antenna in Skytex SP728.
Wat je nodig hebt
-
-
Make sure the device is powered off
-
Rotate the device so the ports and screws face you
-
-
-
-
Use the soldering station and remove soldered connections to the antenna wires.
-
Now replace the antenna.
-
Follow the link below for additional soldering information "https://www.ifixit.com/Guide/How+To+Sold...
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
Één andere persoon heeft deze handleiding voltooid.