Ga door naar hoofdinhoud

Inleiding

The wires in headphones are an essential part. If sound is not generating from one speaker, the problem may be from a rip or break in the wires found within the earpiece. This guide shows you how to repair a broken wire inside the earpiece for the Skullcandy UPROCK S5URFZ-390.

Onderdelen

Geen onderdelen opgegeven.

  1. Remove the cushion from the ear piece.
    • Remove the cushion from the ear piece.

  2. Use a Phillips #0 to unscrew three 3.4MM screws from the earpiece. Use a Phillips #0 to unscrew three 3.4MM screws from the earpiece.
    • Use a Phillips #0 to unscrew three 3.4MM screws from the earpiece.

  3. Find the wires connected to the speaker and check if they are intact. Find the wires connected to the speaker and check if they are intact.
    • Find the wires connected to the speaker and check if they are intact.

  4. If a wire is broken, use a soldering iron to reattach  it to the speaker.
    • If a wire is broken, use a soldering iron to reattach it to the speaker.

    • To learn how to solder, read the Hoe moet je (de-)solderen? Guide.

    • After soldering is complete, the wires should look like this.

Eindstreep

2 andere personen hebben deze handleiding voltooid.

Kayla Robinson

Lid sinds: 24-03-15

260 Reputatie

2 handleidingen geschreven

Één commentaar

my jack is broken can i get a whole new wire so i could do soldering or can i use any other wire. if i use any other wire can i connect in btw of old wire coz i removed the jack by cutting the wire from jack or do i have to do soldering from beginning form inside.

Anuj Verma - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 8

Altijd: 5,791