Ga door naar hoofdinhoud

Inleiding

If you are having a problem with your device's Front motor, Here is a Step by step guide to replace a faulty or broken Front motor.

Onderdelen

Geen onderdelen opgegeven.

  1. Remove the two 12mm screws from the front face plate with the PH2 bit from the tool kit. Remove the two 12mm screws from the front face plate with the PH2 bit from the tool kit.
    • Remove the two 12mm screws from the front face plate with the PH2 bit from the tool kit.

  2. Once the screws are removed pull the front face plate off. This will allow access to the belt and motor. Once the screws are removed pull the front face plate off. This will allow access to the belt and motor. Once the screws are removed pull the front face plate off. This will allow access to the belt and motor.
    • Once the screws are removed pull the front face plate off. This will allow access to the belt and motor.

  3. Lift the brush roller upwards towards you, and the brush roller should come out along with the belt. Lift the brush roller upwards towards you, and the brush roller should come out along with the belt. Lift the brush roller upwards towards you, and the brush roller should come out along with the belt.
    • Lift the brush roller upwards towards you, and the brush roller should come out along with the belt.

  4. Remove the belt from the motor mount, and then replace with a new belt. Remove the belt from the motor mount, and then replace with a new belt.
    • Remove the belt from the motor mount, and then replace with a new belt.

  5. Remove the solder from both  motor terminals. Remove the solder from both  motor terminals.
    • Remove the solder from both motor terminals.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Ashley Calkins

Lid sinds: 02-02-17

503 Reputatie

3 handleidingen geschreven

Team

USF Tampa, Team 16-2, Blackwell Spring 2017 Lid van USF Tampa, Team 16-2, Blackwell Spring 2017

USFT-BLACKWELL-S17S16G2

4 Leden

6 handleidingen geschreven

2 Opmerkingen

Well done, Ashley! You might want to note that using a solder remover is helpful.

Jimbo - Antwoord

Where can I obtain the new motor with the plastic gear?

F V - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 18

Altijd: 2,006