Inleiding
In this guide we dissassemble the Sega Master System II
Wat je nodig hebt
Video overzicht
-
-
Remove the 5 screws (3 at the back and 2 on the front)
-
Remove the screw at the side (this screws is different then the other 5 so remember to put them away from the other 5 screws since they are similar)
-
This screw is for the rf shield under for the voltage regulator under this bigger rf shield, its not needed to remove that screw
-
-
To reassemble your device, follow these instructions in reverse order.
Screenshots taken from a video by Global Garage
To reassemble your device, follow these instructions in reverse order.
Screenshots taken from a video by Global Garage
Annuleren: ik heb deze handleiding niet afgemaakt.
3 andere personen hebben deze handleiding voltooid.
3 opmerkingen
This is in the wrong section.
Nope, its in the Sega Master System area.
Krisow -
Not a Master System