Inleiding

Use this guide to replace a worn out button pad on your Samsung T139.

Power off your phone before beginning disassembly Apply pressure to the back cover and slide towards the base Apply pressure to the back cover and slide towards the base
  • Power off your phone before beginning disassembly

  • Apply pressure to the back cover and slide towards the base

Voeg opmerking toe

With a plastic opening tool, lift and remove the battery With a plastic opening tool, lift and remove the battery
  • With a plastic opening tool, lift and remove the battery

Voeg opmerking toe

Remove the four Phillips 1.0mm #0 screws Remove the four Phillips 1.0mm #0 screws
  • Remove the four Phillips 1.0mm #0 screws

Voeg opmerking toe

Using the plastic opening tool, work around the edge of the black plastic cover until it pops off Using the plastic opening tool, work around the edge of the black plastic cover until it pops off Using the plastic opening tool, work around the edge of the black plastic cover until it pops off
  • Using the plastic opening tool, work around the edge of the black plastic cover until it pops off

Voeg opmerking toe

Remove side buttons by lifting them off the board Remove side buttons by lifting them off the board
  • Remove side buttons by lifting them off the board

Voeg opmerking toe

Lift circuit board up gently
  • Lift circuit board up gently

  • Be careful to not pull ribbon cord apart when removing

Voeg opmerking toe

Lift away button pad Lift away button pad
  • Lift away button pad

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Reagan May

Lid sinds: 23-10-14

561 reputatie

9 handleidingen geschreven

Team

Michigan Tech, Team 1-1, Lauer Fall 2014 Lid van Michigan Tech, Team 1-1, Lauer Fall 2014

MTU-LAUER-F14S1G1

3 Leden

9 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 2

Altijd: 173