Ga door naar hoofdinhoud
  1. Samsung Gear Fit Screen Replacement, Watch Band: step 1, image 1 of 2 Samsung Gear Fit Screen Replacement, Watch Band: step 1, image 2 of 2
    • Place your thumbs on the ends of the screen.

    • Push the watch outward while pulling the band away from the watch.

  2. Samsung Gear Fit Screen Replacement, Screen: step 2, image 1 of 1
    • Heating the device with a hair dryer may warp the screen or damage the device. It it preferable to use an iOpener for this step.

    • For step-by-step instructions on using an iOpener, see the Instructies voor de iOpener.

    • Use a hair dryer, heat gun, or an iOpener to heat the Gear Fit for 1-2 minutes until it is hot to the touch.

  3. Samsung Gear Fit Screen Replacement: step 3, image 1 of 3 Samsung Gear Fit Screen Replacement: step 3, image 2 of 3 Samsung Gear Fit Screen Replacement: step 3, image 3 of 3
    • The screen is connected to the device by a ribbon cable on the left side with the power button facing you. Do not try to completely separate the screen from the device yet, and be careful.

    • Gently pry the screen loose using a plastic opening tool.

    • If the screen doesn't easily come loose, more heating may be required

  4. Samsung Gear Fit Screen Replacement: step 4, image 1 of 3 Samsung Gear Fit Screen Replacement: step 4, image 2 of 3 Samsung Gear Fit Screen Replacement: step 4, image 3 of 3
    • Using tweezers as a lever, pry the inner assembly out of the external casing.

    • This will be harder than removing the screen. Moderate force may be required.

  5. Samsung Gear Fit Screen Replacement: step 5, image 1 of 3 Samsung Gear Fit Screen Replacement: step 5, image 2 of 3 Samsung Gear Fit Screen Replacement: step 5, image 3 of 3
    • Disconnect the ribbon cables connecting the screen to the motherboard by lifting their metal connectors up off of the board with tweezers.

  6. Samsung Gear Fit Screen Replacement: step 6, image 1 of 2 Samsung Gear Fit Screen Replacement: step 6, image 2 of 2
    • Gently peel the screen assembly up and away from the device using tweezers.

Conclusie

To reassemble your device, follow these instructions in reverse order.

17 andere personen hebben deze handleiding voltooid.

Nathan Powell

Lid sinds: 24-04-14

1.577 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 11-49, Amido Spring 2014 Lid van Cal Poly, Team 11-49, Amido Spring 2014

CPSU-AMIDO-S14S11G49

4 Leden

4 handleidingen geschreven

28 Opmerkingen

Hi!

Thank you very much for this tuto. But wher can we acquire the screen ???

Thanks a lot.

AB

aaa - Antwoord

Where can you buy replacement screen?

Yele Olaniyi - Antwoord

I'm also finding it difficult to buy a replacement screen too. Has anyone discovered some. I thought this website was selling some not too long ago. Any more coming in?

Rochelle - Antwoord

Hi guys,

is it possible to detach the display unit from the protective plastic cover (I think it's not glass) ?

alexxtodorov - Antwoord

Does anyone know where to get the replacement screen?

MrGratts - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 13

Afgelopen 30 dagen: 89

Altijd: 52,382