Inleiding

This guide shows you how to remove a broken camera and install a new camera.

  1. push down the back cover of the phone, then take it out.
    • push down the back cover of the phone, then take it out.

  2. Remove the battery.
    • Remove the battery.

  3. Remove the (2) 4.1 mm screws on screen.
    • Remove the (2) 4.1 mm screws on screen.

  4. Remove front outside casing with plastic opening tools. Remove front outside casing with plastic opening tools. Remove front outside casing with plastic opening tools.
    • Remove front outside casing with plastic opening tools.

  5. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  6. Use tweezers to remove the camera from its holding slot.
    • Use tweezers to remove the camera from its holding slot.

  7. Use a plastic opening tool to lift the tab that holds the camera ribbon in place.
    • Use a plastic opening tool to lift the tab that holds the camera ribbon in place.

  8. Use tweezers to remove the camera.
    • Use tweezers to remove the camera.

  9. Slide ribbon of new camera under the same tab.
    • Slide ribbon of new camera under the same tab.

  10. Close the tab down onto the new camera ribbon.
    • Close the tab down onto the new camera ribbon.

  11. Use tweezers to put the new camera into the camera slot that previously held the old camera.
    • Use tweezers to put the new camera into the camera slot that previously held the old camera.

    • WARNING: Do not touch the camera lens as it will easily scratch or smudge.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Chris

Lid sinds: 16-04-11

133 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 12-35, Maness Spring 2011 Lid van Cal Poly, Team 12-35, Maness Spring 2011

CPSU-MANESS-S11S12G35

4 Leden

10 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 2

Altijd: 2,115