Inleiding
MacBook Pro A1708 SSD Removal & Replacement Guide
This guide explains how to remove and replace the SSD in the MacBook Pro 13-inch A1708 (2016–2017). The A1708 is the non-Touch Bar model with function keys and has a removable SSD.
Before starting, shut down your MacBook, unplug all cables, and work on a clean, static-free surface. Keep track of screws because they vary in size. A magnetic mat is recommended.
🛠️ Tools Needed
- Pentalobe 1.2 mm screwdriver – bottom case screws
- Torx T5 screwdriver – SSD screw
- Plastic opening tools – safely lift the bottom cover
- Tweezers – small screws/connectors
⚠️ Check SSD Compatibility
The A1708 uses a proprietary Apple PCIe 3.0 SSD. Common capacities are 128GB, 256GB, 512GB, and 1TB.
There are two 256GB SSD variants, and some may not work with the Mid-2017 A1708. Check the SSD's model/serial information before purchasing.
💾 Apple OEM SSD Options
128GB
256GB
🔄 NVMe Upgrade Option
Instead of buying an Apple OEM SSD, you can use an NVMe SSD with an A1708-compatible adapter. This can be a cheaper way to increase storage.
A1708 NVMe Adapter:
⚠️ Important
This guide applies specifically to the A1708 MacBook Pro with function keys. Later MacBook Pro models use soldered storage and cannot have their SSD replaced in the same way.
Always verify the exact MacBook model and SSD compatibility before purchasing parts.
Wat je nodig hebt
-
-
-
You’ll need specific screwdrivers and opening tools to safely disassemble the MacBook.
-
Screwdriver set
-
Suction cup
-
Pentalobe 1.2mm screwdriver
-
Torx T5 screwdriver
-
Plastic opening tools
-
Tweezers
-
Magnetic mat (recommended)
Vraag FixBot
-
-
-
Access the internals by removing the lower case.
-
Turn laptop over
-
Remove all screws on bottom cover with Pentalobe screwdriver
-
Press suction cup to lower case and pull up to create gap
-
Insert plastic tool into gap, release hidden clips
-
Lift front edge and slide cover towards you
-
-
-
-
Prevent electrical damage by disconnecting connectors.
-
Peel back the plastic protective cover over the battery connection area.
-
Gently lift the small black locking tab on the battery board data cable connector using a plastic spudger.
-
Slide the ribbon cable straight out of its socket on the logic board to sever data communication.
-
Remove the Battery Power Jumper Screw
-
Use a T5 Torx screwdriver to remove the single T5 screw (pancake screw) securing the battery power connector/jumper to the logic board.
-
Gently lift the metal battery connector tab upward using a plastic spudger just enough to clear the terminal contact and prevent it from springing back into place.
-
-
-
The removable SSD can now be accessed.
-
Locate SSD module
-
Unscrew retaining screw with Torx T5
-
Gently slide SSD out of connector
-
-
-
Insert the new compatible SSD into the slot.
-
Align new SSD with connector
-
Slide firmly into place
-
Secure with Torx T5 screw
-
-
-
Close the device and restore functionality.
-
Reconnect battery cable
-
Replace bottom cover, align clips
-
Press firmly and reinsert screws
-
-
You’ve now successfully removed and replaced the SSD in your MacBook Pro 13" A1708 (2017). By carefully following the steps and keeping track of screws and connectors, your MacBook should boot up with the new drive ready for macOS installation or migration.
To reassemble your device, follow these instructions in reverse order.
- Take your e-waste to an R2 certified recycler or an e-Stewards certified recycler.
- These facilities ensure safe handling of hazardous materials, secure data destruction, and environmentally responsible recycling.
- This way, you protect the environment, keep toxic materials out of landfills, and ensure your data is securely destroyed.
Remember to reinstall macOS or restore from backup after the upgrade. If you’re unsure about compatibility, double-check the SSD part number against your MacBook’s EMC code (3164 for 2017).
With the right tools and patience, upgrading your SSD can extend the life of your MacBook and give you the storage space you need.
Repair didn’t go as planned? Check out our Answers community for troubleshooting help.
