Ryobi P277 Trigger Replacement - iFixit reparatiehandleiding

Inleiding

This guide will instruct the user on replacing the trigger of the Ryobi P277. This guide does require soldering and removing electrical components.

Wat je nodig hebt

Stap 1 Trigger

Ryobi P277 Trigger Replacement, Trigger: stap 1, afbeelding 1 van 2

Ryobi P277 Trigger Replacement, Trigger: stap 1, afbeelding 2 van 2

Lay the device on its side.
Remove eight 5 mm screws using a TR10 Torx screwdriver.
Separate the two halves by pulling up on the top half.
The two halves are still attached, so use caution when opening the device.

Stap 2

Ryobi P277 Trigger Replacement: stap 2, afbeelding 1 van 1

Use a Phillips head screwdriver to remove this bracket.

Stap 3

Ryobi P277 Trigger Replacement: stap 3, afbeelding 1 van 1

Locate the red and black wires connecting the trigger to the motor.
Use a soldering iron to separate these wires from the trigger.
For soldering help, visit the How to Solder and Desolder Connections guide.

Conclusie

To reassemble your device, follow these instructions in reverse order. You must use solder to reattach the wires in their correct positions.

Auteur

met 1 andere bijdrager

Alexander Farbo

Lid sinds: 03/08/23

281 Reputatie

2 handleidingen geschreven

Team

University of New Orleans, Team 3-2, McDonald Spring 2023 Lid van University of New Orleans, Team 3-2, McDonald Spring 2023

UNO-MCDONALD-S23S3G2

3 Leden

4 handleidingen geschreven

0 opmerkingen

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 9

Altijd: 65