Ga door naar hoofdinhoud

Ridgid R82005 Trigger Switch Replacement

Wat je nodig hebt

  1. Ridgid R82005 Trigger Switch Replacement, Trigger Switch: stap 1, afbeelding 1 van 1
    • Eject the battery from the drill.

    • Unscrew the seven M3x15.3mm screws, with the 2mm hex screwdriver bit, that secures the Housing Assembly.

    • Unscrew the M5x18.5mm screw if belt clip is attached.

  2. Ridgid R82005 Trigger Switch Replacement: stap 2, afbeelding 1 van 1
    • Push the metallic Housing Connecting clip out with flat side of the plastic spudger.

    • Eject battery before attempting this step.

  3. Ridgid R82005 Trigger Switch Replacement: stap 3, afbeelding 1 van 3 Ridgid R82005 Trigger Switch Replacement: stap 3, afbeelding 2 van 3 Ridgid R82005 Trigger Switch Replacement: stap 3, afbeelding 3 van 3
    • Remove the top half of the Housing Assembly.

    • Keep track of where the wires lead from the motor assembly to trigger switch.

    • Remove all internal components.

  4. Ridgid R82005 Trigger Switch Replacement: stap 4, afbeelding 1 van 3 Ridgid R82005 Trigger Switch Replacement: stap 4, afbeelding 2 van 3 Ridgid R82005 Trigger Switch Replacement: stap 4, afbeelding 3 van 3
    • Motor Assembly/Gearbox and Trigger Switch removed from Housing Assembly.

    • Desolder the black wire connected to the motor.

    • Flip Trigger Switch and desolder red wire.

    • To learn how to solder, use our How to Solder and Desolder Connections guide.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Alex Cominos

Lid sinds: 02/14/19

376 Reputatie

2 handleidingen geschreven

Team

USF Tampa, Team S1-G2, Leahy Spring 2019 Lid van USF Tampa, Team S1-G2, Leahy Spring 2019

USFT-LEAHY-S19S1G2

4 Leden

10 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 15

Altijd: 410