Inleiding

Only requires removing a few screws. No special tools required.

Onderdelen

Geen onderdelen nodig.

Flip the camera so that the bottom is facing you. Take a spare coin and unscrew the battery cover off.
  • Flip the camera so that the bottom is facing you.

  • Take a spare coin and unscrew the battery cover off.

Voeg opmerking toe

Remove the batteries, making sure to note their proper alignment.
  • Remove the batteries, making sure to note their proper alignment.

Voeg opmerking toe

Remove two 4.8mm screws. Remove one 3.4mm screw.
  • Remove two 4.8mm screws.

  • Remove one 3.4mm screw.

  • Remove one 2.65mm screw.

  • Lift off the back cover.

Voeg opmerking toe

Remove three 3.5mm screws.
  • Remove three 3.5mm screws.

  • Remove two 3.8mm screws.

  • Remove one 6.35mm screw.

  • Remove one 4mm screw. Lift off the disk.

  • Remove one 5.11mm screw.

Voeg opmerking toe

Lift up the silver, metal piece
  • Lift up the silver, metal piece

  • Please note that some internal pieces may come loose during this process.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Nick

Lid sinds: 19-04-11

411 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 8-7, Regan Spring 2011 Lid van Cal Poly, Team 8-7, Regan Spring 2011

CPSU-REGAN-S11S8G7

4 Leden

4 handleidingen geschreven

Één commentaar

good advice, will use, have multiple Minolta cameras to work with.

gabriel johnson - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 9

Afgelopen 30 Dagen: 37

Altijd: 7,795