Inleiding

This guide will systematically explain how to replace the shaving blade of the Remington MB4040. A rough or irritating shave is most likely caused by a dull blade. The replacement of this dull blade will allow for a more comfortable shave.

Onderdelen

Geen onderdelen nodig.

Press the black button to release the blade from its locked position. Press the black button to release the blade from its locked position. Press the black button to release the blade from its locked position.
  • Press the black button to release the blade from its locked position.

Voeg opmerking toe

Remove the two 8.0 mm PH00 Phillips head screws from the blade assembly. Detach the silver blade from the blade assembly and replace with the new blade. Detach the silver blade from the blade assembly and replace with the new blade.
  • Remove the two 8.0 mm PH00 Phillips head screws from the blade assembly.

  • Detach the silver blade from the blade assembly and replace with the new blade.

The entre assemble comes apart once you remove the blade. I cannot figure out how to get it back together and in the housing. Any suggestions?

sublime - Antwoord

I have the same problem, I cannot figure out how the spring is attached/held to the blade.

Peter J. Ford - Antwoord

Conclusie

To reassemble your device, follow these instructions in reverse order.

Cameron Carnahan

Lid sinds: 20-01-15

697 Reputatie

6 handleidingen geschreven

Team

USF Tampa, Team 1-5, Blackwell Winter 2015 Lid van USF Tampa, Team 1-5, Blackwell Winter 2015

USFT-BLACKWELL-W15S1G5

3 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 9

Afgelopen 7 Dagen: 34

Afgelopen 30 Dagen: 176

Altijd: 4,170