Inleiding

This guide will lead you through the steps necessary to access the screen's components as well as how to assure it is properly connected.

Onderdelen

Geen onderdelen nodig.

Flip the device over
  • Flip the device over

Voeg opmerking toe

Unscrew the 2 screws closest to the screen
  • Unscrew the 2 screws closest to the screen

Voeg opmerking toe

  • Flip the device back over

  • It is now standing right side up

Voeg opmerking toe

  • Unscrew the top.

Voeg opmerking toe

  • Take the top of the device off.

Voeg opmerking toe

  • Unscrew the button board.

Voeg opmerking toe

  • Take off the button board.

Voeg opmerking toe

  • Unscrew all visible screws on the black logic board cover.

Voeg opmerking toe

  • Lift the screen straight up out of the device.

Voeg opmerking toe

  • Check that the single input plug from the logic board to the screen (reverse side) is completely pushed in by pressing it firmly into the socket.

  • Also check that the 2 output plugs from the screen to the logic board are completely pushed in by pressing them firmly into the highlighted sockets.

  • You have successfully reconnected your display screen.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Nick Sherman

Lid sinds: 26-09-12

31 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 7-50, Forte Fall 2012 Lid van Cal Poly, Team 7-50, Forte Fall 2012

CPSU-FORTE-F12S7G50

5 Leden

8 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 1

Altijd: 345