Remove the Ni-Cad battery from the PowerBook 180. Slide the arrows toward the front of the computer until the battery can slide out.
  • Remove the Ni-Cad battery from the PowerBook 180.

  • Slide the arrows toward the front of the computer until the battery can slide out.

Voeg opmerking toe

Removing the screws securing the bottom plate from the PowerBook 180. There are 5 Torx T8 screws, 4 of which are located on the bottom and 1 on the back above the modem port.
  • Removing the screws securing the bottom plate from the PowerBook 180.

  • There are 5 Torx T8 screws, 4 of which are located on the bottom and 1 on the back above the modem port.

Voeg opmerking toe

Your computer should look like the two pictures after the bottom plate is removed. Your computer should look like the two pictures after the bottom plate is removed.
  • Your computer should look like the two pictures after the bottom plate is removed.

Voeg opmerking toe

Locate the modem board, which is next to the DC-in port. There are two Torx T8 screws marked in red in the pictures.  Remove these screws and pull up on the modem board to remove.
  • Locate the modem board, which is next to the DC-in port.

  • There are two Torx T8 screws marked in red in the pictures. Remove these screws and pull up on the modem board to remove.

  • To reassemble your PowerBook, follow these instructions in reverse.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Jack Byrnes

Lid sinds: 17-10-10

1.148 Reputatie

2 handleidingen geschreven

Team

Master Techs Lid van Master Techs

Community

277 Leden

724 handleidingen geschreven

Één commentaar

Great guide. Worked for me of the Powerbook 140. Thanks!

Jack - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 6

Altijd: 967