Ga door naar hoofdinhoud

Inleiding

The spring is located within a slender metal mount that is screwed into the front underside of the Polaroid. It is below the camera lens and can be seen through the mount it is within.

Onderdelen

Geen onderdelen opgegeven.

  1. Fully extend the bellows to prevent collapse using the #1 tab. Remove the camera cover in order to make the camera easier to work with. When collapsing bellows, press down on the metal frame above the bellows.
    • Fully extend the bellows to prevent collapse using the #1 tab.

    • Remove the camera cover in order to make the camera easier to work with.

    • When collapsing bellows, press down on the metal frame above the bellows.

  2. Remove the Phillips #0 6mm screw on the shutter mount and the washers using a size 5 nut driver.
    • Remove the Phillips #0 6mm screw on the shutter mount and the washers using a size 5 nut driver.

  3. Unscrew the 4.5 mm Phillips screw on the right with a Phillips #0 Screwdriver.
    • Unscrew the 4.5 mm Phillips screw on the right with a Phillips #0 Screwdriver.

  4. Remove the spring from the shutter mount. The hooks on the ends of the spring within the shutter mount may recoil when being removed, and may be sharp enough to puncture skin. When reassembling, getting the smaller screw on the right hand side can be challenging. It may be helpful to tip the camera upside down so that gravity helps the screw fall into place.
    • Remove the spring from the shutter mount.

    • The hooks on the ends of the spring within the shutter mount may recoil when being removed, and may be sharp enough to puncture skin.

    • When reassembling, getting the smaller screw on the right hand side can be challenging. It may be helpful to tip the camera upside down so that gravity helps the screw fall into place.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Katie Miller

Lid sinds: 14-04-15

635 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 4-3, Maness Spring 2015 Lid van Cal Poly, Team 4-3, Maness Spring 2015

CPSU-MANESS-S15S4G3

4 Leden

5 handleidingen geschreven

Één commentaar

Thank you so very much!!!

You saved my camera and my sanity!!!!

CAROL HOLDER - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 7

Altijd: 717