Repareer je spullen Gemeenschap Winkel

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

PlayStation Controller Port Replacement

Inleiding

This will guide you through the replacement of your controller port.

Wat je nodig hebt

  1. PlayStation Controller Port Replacement, Open the Console: stap 1, afbeelding 1 van 1

    • Before you begin, make sure the console is turned off and unplugged.

    • Turn the console upside down and remove the five 15.8 mm-long Phillips #1 screws.

    Vertaal

  2. PlayStation Controller Port Replacement: stap 2, afbeelding 1 van 2 PlayStation Controller Port Replacement: stap 2, afbeelding 2 van 2

    • While holding the top and bottom halves of the console together, flip the console back over. Lift the top cover straight up to remove it.

    Vertaal

  4. PlayStation Controller Port Replacement, Controller Port: stap 3, afbeelding 1 van 2 PlayStation Controller Port Replacement, Controller Port: stap 3, afbeelding 2 van 2

    • Remove the two screws securing the controller port to the case.

    Vertaal

  5. PlayStation Controller Port Replacement: stap 4, afbeelding 1 van 1

    • Gently disconnect the ribbon cable from the logic board. This is done by pulling on the blue area of the cable near the connector.

    Vertaal

  6. PlayStation Controller Port Replacement: stap 5, afbeelding 1 van 1

    • Remove and replace the controller port.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

11 andere personen hebben deze handleiding voltooid.

Auteur

met 6 andere bijdragers

JakeDeschamps

Lid sinds: 10/28/09

1.901 Reputatie

7 handleidingen geschreven

Medailles: 18

+15 andere badges

Team

Cal Poly, Team 5-2, Regan Fall 2009 Lid van Cal Poly, Team 5-2, Regan Fall 2009

CPSU-REGAN-F09S5G2

5 Leden

8 handleidingen geschreven

5 opmerkingen

I try replacing the controller and still wouldn't play memory cards.

redevil19 - Antwoord

I changed the controller port but the psx still doesn't recognize any controller. Both controller port and ribbon cable work perfect in other console. I wonder which components on the mother board are related with the controller ports so I can check them with a tester.

Daniel Prieto - Antwoord

I replaced the PS605 fuse and now the controllers work again! Thanks to this video https://www.youtube.com/watch?v=HdULot5F...

Daniel Prieto -

I'm having a weird issue, it will read in second do

Port but not the first. Changed controller port and still having the same issue

michael wise - Antwoord

The problem on mine is where I can’t use memory card slot 1 but Slot 2 works and is what I use but I would like to used slot 1 and have more than just a single memory card for playing games on it.

Travirus - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 31

Afgelopen 30 dagen: 149

Altijd: 26,367