Ga door naar hoofdinhoud

Inleiding

Use this guide to replace a failed battery in the Photive Rain.

Onderdelen

Geen onderdelen opgegeven.

  1. Photive Rain Battery Replacement, Back Panel: stap 1, afbeelding 1 van 1
    • Turn the speaker off before disassembling.

    • Pull the suction cup from its groove in the back of the speaker by twisting and turning it.

  2. Photive Rain Battery Replacement: stap 2, afbeelding 1 van 1
    • Remove the four 8.5 mm screws from the back panel of the speaker.

    • Remove back panel

  3. Photive Rain Battery Replacement, Battery: stap 3, afbeelding 1 van 2 Photive Rain Battery Replacement, Battery: stap 3, afbeelding 2 van 2
    • Remove the plastic cover in front of the battery slot.

    • Unscrew all the 8.5mm screws that hold the cover to the slot.

    • Separate the battery from the back panel as shown in photograph 3.

    • Caution: manipulation of the device while the battery is still connected to the motherboard may result in electric shock.

  4. Photive Rain Battery Replacement: stap 4, afbeelding 1 van 1
    • Remove the battery from the motherboard.

    • Use a soldering pen to remove the solder connecting the battery wires to the motherboard.

    • Click here to access the iFixit Soldering Guide. This will provide a safe and instructive manual on the usage of soldering pens.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

abcdef ghijk

Lid sinds: 15-02-16

723 Reputatie

4 handleidingen geschreven

Team

IUPUI, Team 1-4, Harley Spring 2016 Lid van IUPUI, Team 1-4, Harley Spring 2016

IUPUI-HARLEY-S16S1G4

3 Leden

4 handleidingen geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 2

Altijd: 404