Inleiding

If you know that your screen needs to be replaced, this guide will show you how to do so.

  1. Unscrew the two 7.35mm Torx T6 screws.
    • Unscrew the two 7.35mm Torx T6 screws.

  2. Using the flat end of the spudger, carefully pry the black cover on the top from the blue front cover.
    • Using the flat end of the spudger, carefully pry the black cover on the top from the blue front cover.

    • Carefully remove the speaker from the back white cover by just pulling it gently. It is glued on.

    • Unscrew the #00 5.75mm Phillips screws from the bottom of the motherboard. The front blue panel should fall right off.

    • Carefully pull back the brown cable holders and separate the screen from the motherboard.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Gabe

Lid sinds: 23-01-11

501 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 5-21, Amido Winter 2011 Lid van Cal Poly, Team 5-21, Amido Winter 2011

CPSU-AMIDO-W11S5G21

4 Leden

6 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 5

Altijd: 2,209