1. Unscrew the two 7.35mm Torx T6 screws.
    • Unscrew the two 7.35mm Torx T6 screws.

    Voeg opmerking toe

  2. Using the flat end of the spudger, carefully pry the black cover on the top from the blue front cover.
    • Using the flat end of the spudger, carefully pry the black cover on the top from the blue front cover.

    Voeg opmerking toe

    • Carefully remove the speaker from the back white cover by just pulling it gently. It is glued on.

    Voeg opmerking toe

    • Unscrew the #00 5.75mm Phillips screws from the bottom of the motherboard. The front blue panel should fall right off.

    Voeg opmerking toe

    • The blue keys will either come off with the blue front case, or stay on the motherboard.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Gabe

Lid sinds: 23-01-11

501 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 5-21, Amido Winter 2011 Lid van Cal Poly, Team 5-21, Amido Winter 2011

CPSU-AMIDO-W11S5G21

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 476