Inleiding

Follow this guide to learn how to replace your non-functioning button pad.

Onderdelen

Geen onderdelen nodig.

Keep track of all pieces removed from the device.
  • Keep track of all pieces removed from the device.

  • Gently pull off the device cover. The cover snaps on and off easily where the cover attaches to the Palm IIIc device

Voeg opmerking toe

Using a Phillips head screw driver, take out the four screws on the back of the device. You may have to pull them out with your hands once they are unscrewed.
  • Using a Phillips head screw driver, take out the four screws on the back of the device. You may have to pull them out with your hands once they are unscrewed.

  • There will be two long screws and two short screws. The long screws come from the top of the device, and the short screws come from the bottom of the device.

Voeg opmerking toe

Lay Palm IIIc face-up and remove the front cover.
  • Lay Palm IIIc face-up and remove the front cover.

  • Do this firmly but not with too much force so as to not break or disturb anything your not supposed to.

Voeg opmerking toe

Using a prying tool, carefully pop button pad out of the cover. Using a prying tool, carefully pop button pad out of the cover.
  • Using a prying tool, carefully pop button pad out of the cover.

Voeg opmerking toe

Insert the new button pad where the old one used to be.
  • Insert the new button pad where the old one used to be.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Paulina Trujillo

Lid sinds: 07-04-11

241 Reputatie

9 handleidingen geschreven

Team

Cal Poly, Team 20-69, Walters Spring 2011 Lid van Cal Poly, Team 20-69, Walters Spring 2011

CPSU-WALTERS-S11S20G69

5 Leden

9 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 1,232